Maintenance of DCW-4300 Full-auto Wet Wipes Folding Machine

2021-09-15


1. Daily Maintenance Items

Check whether the compressed air pressure of DCW-4300 Full-auto Wet Wipes Folding Machine meets the requirements.

Remove the accumulated water in the air source treatment components, and observe the oil level in the lubricator at the same time, if the oil level is not enough, add it.

Clean off the dust on the surface of each photoelectric sensor.

Clean exposed surfaces of the folder.

DCW-4300 Full-auto Wet Wipes Folding Machine

2. weekly maintenance items

Add lubricating oil to the sprocket and chain and adjust the chain tension.

Adjust the tightness of the conveyor belt once.

3. monthly maintenance items

Add lubricating oil once to each conveying roller.

Change the oil after the reducer runs for 300 hours for the first time, and replace it after 1500 hours of operation.

Check the tightness of each connection of DCW-4300 Full-auto Wet Wipes Folding Machine.

undefined

undefined