How to maintain the wet wipes packaging machine?


How to maintain the wet wipes packaging machine? Let's take a look below!

    Precautions for daily maintenance of wet wipes packaging machine:

(1) The wet wipes packaging machine should be operated on a dry, tidy and firm water platform, and keep a distance of at least 10 cm from the edge of the table.

(2) Before connecting the wet wipes packaging machine to 220V (mains), please check whether the voltage marked on the product is consistent with the local voltage.

(3) It is strictly forbidden for children to touch the machine without adult supervision.

(4) When the wet wipes packaging machine is not used for a long time, please unplug the power cord from the power socket to avoid adverse effects caused by misoperation.

(5) When moving the wet wipes packaging machine, try to move the machine forward as much as possible, do not turn it upside down, so as to avoid the residual water in the machine from overflowing.

(6) When cleaning the machine, do not directly rinse or soak the machine.

(7) The wet wipes packaging machine has not been used for a long time. When using it again, please wash the inside of the machine completely with hot water before use.

(8) If the machine has quality problems that you cannot solve, please contact customer service or go to the designated service station for maintenance. Do not disassemble or repair the machine without permission to avoid the risk of electric leakage or electric shock.

(9) Do not move the body when the machine is running, and do not disassemble or assemble parts during operation.

(10) Please do not subject the product to severe impact or drop.

(11) During the packaging process of wet wipes, do not block the cooling holes.

(12) When disassembling the machine for cleaning or maintenance, please unplug the power cord from the power socket first.

(13) During the operation of the machine, do not put your hands or other hard objects into the body, and ensure that the machine is placed on a level surface.

(14) When installing the wet wipes packaging machine after cleaning or maintenance, be sure to install the mixing box, the residue box, the filter, the protective cover, the wet wipes tray and the cleaning plate in place, and the upper cover and the pressure rod should be firmly fixed in place.

(15) During the production of wet wipes, do not touch the emergency switch of the mask tray on the side. After the wet wipes are made, the film tray will pop up automatically without manual operation. This switch is used in the event of a malfunction or repair requiring manual opening of the wipes tray.

(16) If there is a sudden power failure after pressing the start button, after turning on the power, add pure water to the water injection port until the indicator light turns red, then stop adding water, press the start button, the machine will restart to heat the wet wipes process . If the power outage is too long, it is recommended not to use this wipe.